6000m 1535nm 7X Uart Angle Measurement Ranging Eye Safety Laser Rangefinders
Product Description
Notice:
1. Do not direct the laser to the human eye.
2. Do not measure targets within 30m.
3. Do not measure distances through glass or translucent materials.
2. Do not measure targets within 30m.
3. Do not measure distances through glass or translucent materials.
| Model | CQ-LRF006 |
| Laser wavelength | 1535nm |
| Distance measurement range | For Nature Targets: 30m-6000m For 2.3m×2.3m Vehicle: 30m-3000m For 1.8m×0.5m Human: 30-1500m |
| Distance measurement accuracy | ±1m(Full range) |
| Accurate measurement rate | ≥98% |
| Measurement frequency | 1Hz |
| Display | LED internal display |
| Angle measurement range | Directions: 0~359° pitch and tilt: ±90° |
| Angle measurement accuracy | 1° |
| Objective lens aperture | 32mm |
| Magnification | 7X |
| Field of view | 6° |
| Diopter range | ±5D |
| Outlet diameter | 4.8 |
| Supply voltage | DC 5V |
| Power consumption | 5W |
| Data transfer interface | Uart(TTL_3.3V) |
| Weight | <200g |
| Operating temperature | -40°C ~ +55°C |
| Storage temperature | -50°C ~ +60°C |
| Main Features | Single-point ranging; two-point ranging; angle measurement |
Manual Guide
1. Do not direct the laser to the human eye.
2. Do not measure targets within 30m.
3. Do not measure distances through glass or translucent materials.
A. Ranging Prepare
1.1 Install Battery:
The Laser Rangefinder use 2pcs CR123A battery to supply, or use DC5-12V power supply.
1.2 Mount Tripod
Mount the LRF on a tripod through the mounting holes,
1.3 Ranging Distance
Press M to choose Mode for measuring,
Press T to ranging distance.
B. Switch Ranging Mode
1. Single-point ranging: Measure the straight-line distance between the observer and the target.
2. Two-point ranging: Measure the straight-line distance between two targets.
3. Angle measurement: Measure the pitch/azimuth angle of the line between the target and the observer relative to the
horizontal/true north direction.
4. Height measurement: Measure the height of the target to the observer's horizontal plane.
5. Setting the "Gate" value: Set the measurement range.
2. Do not measure targets within 30m.
3. Do not measure distances through glass or translucent materials.
A. Ranging Prepare
1.1 Install Battery:
The Laser Rangefinder use 2pcs CR123A battery to supply, or use DC5-12V power supply.
1.2 Mount Tripod
Mount the LRF on a tripod through the mounting holes,
1.3 Ranging Distance
Press M to choose Mode for measuring,
Press T to ranging distance.
B. Switch Ranging Mode
1. Single-point ranging: Measure the straight-line distance between the observer and the target.
2. Two-point ranging: Measure the straight-line distance between two targets.
3. Angle measurement: Measure the pitch/azimuth angle of the line between the target and the observer relative to the
horizontal/true north direction.
4. Height measurement: Measure the height of the target to the observer's horizontal plane.
5. Setting the "Gate" value: Set the measurement range.